Full Surface Aluminum Continuous Geared Hinge LHHD210

• Aluminum alloy with self-lubricating bearings
• Continuous Geared Full Surface Swing Clear Hinge with 1/32” (0.8mm) inset is Ideal for retrofit applications were original hinges have failed
• Can be used with any standard frame without hinge preps.
• The frame face must have a flat surface at least 1-5/8” (41mm) wide.
• 83” length available in clear and dark bronze anodized
• Hinges are shorter than the door height to avoid threshold or carpet clearance problems
• Clearance required between the hinge edge of the door and the frame must be 1/32” (0.8mm)
• For 1-3/4” doors.  48” maximum door width. Up to 200 pounds high frequency and 400 pounds for medium frequency doors.
• UL tested and approved for 90 minutes

Download PDF